← Return to Index

How Much Does Heat Pump Repair Cost in Big Bear?

Bear Valley Plumbing & Heating


If your Big Bear heating is affected due to a heat pump breakdown, you may want to conduct a quick “heater repair near me” online search to find a technician. Among the first things you might want to know is, how much the repairs will cost you.

The answer is, it depends on several factors, such as the size of your home, the heat pump brand, the type, and more.

Heat pump repairs involve some complex steps, which go beyond simply changing your Big Bear furnace filters. If you use a heat pump as your primary heating and cooling system, the following factors will influence the overall cost of repairs:

  • The size of your home and square footage of the heating/cooling area
  • The heat pump brand
  • The energy efficiency
  • If the ductwork needs repairs
  • Average labor costs in Big Bear
  • Additional material needed
  • Time of the year

Let’s consider the primary factors that impact heat pump repair costs.

Heat Pump Repair in Big Bear

Some technicians determine their Big Bear heating pump repair costs based on the type of unit they have to work upon. Broadly speaking, there are two types of heat pumps: air source and geothermal.

Air source heat pumps absorb heat from the air and compress it. The air is then transferred inside or outside your home. These heat pumps are centrally installed and come with and without ducts.

These heat pumps come with an outdoor component as well. This component may need repairs from time to time.
Geo-thermal units absorb heat from the ground to warm your home and transfer heat back into the ground from your house to cool it. These units may also use groundwater to do their job. They rarely need repairs since they have buried tubing. Typically, only the compressor or air handler may need repairs.

Both air source heat pumps and geothermal units use the same kind of indoor components, and repair costs for these usually fall in the same range. However, geothermal units need new tubing regularly, without which the outdoor component may freeze.

More often than not, the repair costs of both types of Big Bear heating pumps tend to be similar, and are influenced more by the unit brand and size than the type.

Heat Pump Labor Costs in Big Bear

To a great extent, the labor costs of repairing a Big Bear heating pump will depend on the type of heat pump being worked upon. Repairing a ductless small-sized heat pump, for example, will cost you less because getting it up and running again will require minimum effort.

An air-source heat pump will require to be funneled in from the outside compressor unit, which takes significant effort. Further, labor costs will increase if your heating system’s ductwork is in need of repairs.

Geo-thermal pump repairs tend to cost the highest and take relatively more time as the technician may have to perform excavation work to reach it.

Labor charges may also increase if the technician needs to lay concrete for the outdoor compressing unit, drill holes in exterior walls, add new electrical lines, or perform additional tasks. Repairs that involve the removal of an old heat pump will also affect the total labor costs.

To be clear on how much you will end up spending on your Big Bear heating, always ask for a cost estimate beforehand. The technician you choose from your “heater repair near me” will be happy to provide it if they are genuinely professional.

Heat Pump Repair Costs for Common Problems

Heat pumps comprise multiple components that need to work cohesively for the unit to perform well. Even if one part of your Big Bear heating unit breaks down, the system will cease to function.

Here are some of the most common heat pump issues and the average costs for mending them.

External Blockage
Since one component of the heat pump is placed outdoors, the condensate line or the pump may get clogged and stop functioning. Clearing the blockage, the drain line, and the pump can resolve this issue. Depending on the severity of the clog, this may cost you $100 and upwards.

Refrigerant Leakage
Refrigerant leaks may mean that you may have to refill them frequently. You may also need to get the coils repaired or replaced, depending on the extent of the leak. Fixing this issue can cost you $100 and higher.

Inability to Defrost
This issue tends to occur in air source heat pumps. It can be the result of a broken circuit board or due to inadequate refrigerant. Carrying out repairs for this issue will set you back by $100 and higher.

Cold Air Blasts
If your heat pump is blowing cold air, either your thermostat or your capacitor may be malfunctioning. Fixing this issue can cost you anywhere between $150 and $1500.

Defective Thermostat
Programmable thermostats can malfunction or cease to function over time, affecting your heat pump as well. Repair costs fall in the range of $150 to $250.

Faulty Thermostat Wiring
If your thermostat is wired incorrectly, it may not function as it should. More often than not, rewiring can resolve this issue. You can expect to spend $150 and upwards in repair costs.

Starting Issues
If you’ve been trying to switch on your heat pump to no avail, your faulty thermostat or a broken breaker or fan switch may be responsible. You may have to spend $150 and above to get this issue fixed.

Uneven Temperature
Uneven temperatures are usually caused by broken dampers. In other cases, ducts may require sealing. Repairs will cost you $500 and upwards.

Ductwork Issues
These include air leakage, rusting components, and unit failure. Repairs cost $800 and above. If repairs don’t help, your ducts may need to be replaced.


The heat pump is an important part of your home’s HVAC system. It helps heat as well as cool your home, making it comfortable to live in despite the weather. If your Big Bear heating pump doesn’t perform optimally, you should waste no time in having a technician inspect it and perform the necessary repairs. The reasons why heat pumps give way are numerous, and repairing these units can be tricky. Hence, it is best to avoid DIY repair jobs and entrust the work to the professionals. The money you spend will be well worth it.

Get in Touch with Skilled Big Bear Heating Pump Repair Technicians

When it comes to keeping your home comfortable, our heat pump repair technicians are always here for you. You don’t need to perform a frantic “heating repair near me” online search. Simply contact the licensed pros at Bear Valley Plumbing & Heating today. Call us on (909) 584-4376 or contact us online to know more about how we can help you.

If you are looking for a Big Bear plumbing, heating & air conditioning contractor, please call (909) 584-4376 or complete our online request form.